Tool Holder - CNC Tool Holder - Collet Chuck
Tool holders and components available in 10,000 various specifications with huge inventory to serve its customers. In the mean time, the 180 strong professional staff are highly motivated.
CNC tool holders are available for all machines requiring CAT-V and BT tool holding systems. AT3 shank-taper accuracy exceeds ANSI standards by 35%. Choose from solid-style tool holders, ER and TG collet style tool holders and toolholder collets.
Buy CNC Tooling, Tool Holders, Tool Holder Collets and Bushings online at www.syic.com.tw
collet chucks,collet chuck,manual collet chucks,manual collet chucks,power collet chucks,power collet chuck,5c collet chucks, 5c collet chuck, 16c collet chucks, 16c collet chuck, 3j collet chucks,3j collet chuck,b42 collet chucks,b60 collet chucks,multi-bore collet chucks, Bison collet chucks, ats collet chucks,beere collet fixtures,crawford collet chucks,dunham tool collet chucks,Eagle rock collet chucks,lexair collet chucks,microcentric collet chucks
An earlier article in More Woodturning on turning wine stoppers got me thinking about collet chucks. I wondered if I could make one entirely out of wood. I thought this would be just an exercise to see if I could do it, but it surprised me with its usefulness. Although the All Wood Collet Chuck doesn't have the holding power and range of wooden jaws mounted in a scroll chuck, it does have adequate power for turning tops, wine stoppers, and the odd bit of dowel. The All Wood Collet Chuck also has the advantage of being much faster to mount on the lathe and to convert to different sizes. Another advantage is that it's virtually free.
|
ER TAPPER ( For CNC Lathe) |
STRAIFHT SHANK |
|
|
|
|
|
Set Included
Body, Nut, Wrench,
Set of collet and Box.
S = V/P
S = Spindle running speed for example:
1.Processing material:S45C, V=400~440
2.Pitch = 1.5 P
3.S = V/P = 440/1.5 = 293 ( R.P.M.) |
- For
use in ER Collet to hold taps , the range of hold is 1 mm , it can be
hole taps in any kind of shank.
- The
body was made of SCM-21 steel , tighting screw have been prcise ground.
- Design
of telescopic ability , can be weed out overdo at the same time
with main spindle turn in reverse and table fall back , protect workpiece
and tap against break.
- Ductile
shank was short , so did not commandeer space.
- Floating
assembly , can be automatic to correct deviation of repeated position
in workpiece.
|
|
ER32
Tapping Collet see SYIC-05320
|
| SYIC-05205-1 |
Body |
| SYIC-05205-2 |
Key
ring |
| SYIC-05205-3 |
Fix
key |
| SYIC-05205-4 |
Conjunction
spindle |
| SYIC-05205-5 |
Steel
ball cover |
| SYIC-05205-6 |
Big
spring |
| SYIC-05205-7 |
Steel
ball (4pcs) |
| SYIC-05205-8 |
Little
spring (4pcs) |
| SYIC-05205-9 |
ER
tapper chuck |
| SYIC-05205-10 |
Side
lock screw |
| SYIC-05205-11 |
ER
nut |
| SYIC-05205-12 |
ER
tap collet |
|
1. |
The
processing material is more hard , the M/min should also become more slow. |
2. |
Before use
the Straight Shank ER Tapper, please decide spindle running speed of Lathe
machine, otherwise will make the Shank and Tapping break or split cause
to too fast or
too slow of speed. |
|
MODEL
NO |
TYPE |
D |
d1 |
d2 |
L |
l1 |
l2 |
l3 |
COLLET |
CapACITY |
WEIGHT
(KGS) |
| SYIC-05205 |
TP-20 |
44 |
20 |
34 |
159 |
172 |
79 |
80 |
ER20 |
M3-M16 |
0.5 |
| SYIC-05215 |
TP-32 |
56 |
32 |
50 |
174.5 |
190 |
94.5 |
80 |
ER32 |
M3-M27 |
1.6 |
| SYIC-05225 |
TPM-320 |
44 |
MT3 |
34 |
165 |
178 |
79 |
86 |
ER20 |
M3-M16 |
1.4 |
| SYIC-05235 |
TPM-420 |
44 |
MT4 |
34 |
165 |
178 |
79 |
86 |
ER20 |
M3-M16 |
1.6 |
| SYIC-05245 |
TPM-432 |
56 |
MT4 |
50 |
203.5 |
216.5 |
94.5 |
109 |
ER32 |
M3-M27 |
1.8 |
| MODEL
NO |
TYPE |
COLLET |
TapPER |
WEIGHT
(KGS) |
| SYIC-05210 |
TP-20x7PCS/SET |
4,5,6,7,9,12,13mm |
M3~M16 |
1.22 |
| SYIC-05220 |
TP-32x10PCS/SET |
4,5,6,7,9,12,13,15,19,20mm |
M3~M27 |
3.90 |
| SYIC-05230 |
TPM-320x7PCS/SET |
4,5,6,7,9,12,13mm |
M3~M16 |
1.50 |
| SYIC-05240 |
TPM-420x7PCS/SET |
4,5,6,7,9,12,13mm |
M3~M16 |
1.70 |
| SYIC-05250 |
TPM-432x10PCS/SET |
4,5,6,7,9,12,13,15,19,20mm |
M3~M27 |
4.10 |
